Pay Attention: Watch Out For How Ghost Immobiliser And Tracker Is Taking Over And What You Can Do About It

Autowatch Ghost II Immobiliser Review

Autowatch Ghost immobiliser is the next generation in car security. It is unnoticeable to thieves, and it is impossible for them to start the vehicle without a unique pin code.

The system is built on the CAN Data network and is silent so cannot be detected by common thieves radio signals or diagnostic tools. The system does not require any cutting of the electrical circuit.

What is a ghost immobiliser?

A Ghost Immobiliser helps protect your vehicle from theft by preventing it from starting until a unique pin code is entered. It is a device that can be used on a range of vehicles, and unlike standard immobilisers, it doesn't require a fob or key to operate. It is also extremely difficult to bypass or hack, and operates in complete silence. This means that thieves will have to be quick to escape without being caught.

It guards against key cloning, signal jamming and spoofing. These are all methods that thieves have used to unlock cars with standard immobiliser systems. The device deters thieves from stealing keys through a search in your letterbox, or infiltrating your home and stealing the remote control. The device is able to stop thieves from stealing your joy and pride even if they manage gain access to the key. It prevents the remote from being started until they have entered the code.

As opposed to passive immobilisers that require an ignition key or fob to be activated, a ghost immobiliser is designed to be completely enclosed within the engine and is connected directly to the vehicle's CAN data circuit. It makes use of buttons on the steering wheel or centre console, or door panels to generate a unique pin code which you'll need to enter before the engine starts. The system can also be set to service mode to allow your car to start and drive for a short period of time without the need for a pin code, but it will be able to leave service mode based upon the speed and duration.

It is not possible to hack or bypass the system, even with the most advanced equipment, such as codes grabbing devices. It is also impossible for a regular immobiliser to turn off since the device does not send the same signal that a typical vehicle immobiliser does and only works when connected directly to the circuit CAN.

As a result of its technological advancement and easy installation, the ghost immobiliser has been insurance Approved by TASSA (Tracking & Aftermarket Security System Association). We are a proud TASSA approved Ghost installer and can put the device inside your vehicle to be used for insurance purposes.

What is the Ghost Immobiliser Work?

In simple terms, an immobiliser works by preventing your car from starting if the wrong fob or key is used.  ghost immobiliser review  is done by sending a code to your vehicle's ECU (Engine Control Unit) - when this is sent from the incorrect key or fob, the ECU won't recognize it and therefore your car will not start. This is the reason it's essential to ensure that your car is fitted with an immobiliser installed by an approved and reputable professional.

At MotorGuard MotorGuard is the Midlands most trusted vehicle security specialists and installers. We offer an Autowatch Ghost immobiliser fitting service for a wide variety of modern vehicles and you can be at ease knowing that your pride and joy is safe from thieves.

The Autowatch Ghost immobiliser is one of the world's first aftermarket CAN bus immobiliser systems and protects your vehicle against key-cloning, hacking, and theft. It's designed to remain undetected by thieves because it doesn't use LED indicators or key fobs, and can be hidden within the wiring of your vehicle to ensure that no extra hardware is needed.

Once installed, it is linked to the CAN system of your vehicle and allows you to create an exclusive disarming sequence based on your pin code. This code must be entered prior to driving the vehicle. This pin code can be up to 20 presses long, which provides security. Should you forget your pin number, or if the button is damaged, the device comes with a secure emergency PIN code that can be used to reset the button and allow your vehicle to begin again.

It is because the Ghost immobiliser isn't able to be bypassed or hacked that it's an effective deterrent for thieves. Additionally, it is also TASSA insurance approved (Tracking and Aftermarket Security Systems Association) which could lower the cost of your car insurance.

Ghost immobilisers continue to evolve as technology advances. In this regard, we recommend that you contact an Autowatch Ghost immobiliser fitter as soon as possible to ensure your enjoyment is completely protected. If you're purchasing a new car or want to upgrade your current car, you can trust us to provide you with a high-quality service, so that you can feel confident in your joy and pride for a long time to be.

Is a Ghost Immobiliser compatible with my car?

The Ghost is the first aftermarket CAN-bus immobiliser the world to provide total protection from modern-day vehicle theft. It protects against key cloning, car hacking, ECU swapping, and more. The new TASSA verified Ghost-II systems also provide marking of your vehicle and linking to the International Security Register enabling your insurance company to confirm that you have a genuine Ghost system installed.

Our Ghost Immobiliser prevents thieves from beginning your engine by requiring a unique pin code sequence to be entered or the presence of your smartphone with our Autowatch app downloaded before it can be used. It works like a PIN for a credit card and makes it impossible to leave with your joy and pride without entering the correct pin or phone. The Ghost Immobiliser System integrates into the CAN Data Network, so no wire cutting is required and it operates quietly. It is unnoticeable to thieves and can't be detected by the sophisticated scan RF and code grabbing technology that other systems employ.

When the Ghost is installed by our expert fitters, it's completely hidden and undetectable to the naked eye. it uses the buttons in your vehicle such as those on the steering wheel, door panels & centre console to create a unique pin code sequence which must be entered before the engine can begin to run, just as a password on a bank account. It is then connected to your smartphone using the Autowatch app to allow you to go into the temporary 'Service or Valet' mode that disables the ghost for up to 30 minutes while you give your vehicle to us for service or transportation.

With the high level of personalisation & modification being used in today's cars coupled with the fact that the majority of us are driving older cars, it's no wonder that the number of stolen vehicles has increased dramatically. A lot of them are expensive and rare vehicles that take a long time to replace after being stolen, so making sure your car is not at risk of becoming the next target is essential. A Ghost immobiliser is an affordable investment that will ensure that your vehicle is secure and even be used to recover it in the event of it being stolen.

Does a Ghost Immobiliser operate by cutting principle?

Ghost immobilisers prevent your vehicle from being started until a PIN is entered, along with your key fob. This prevents thieves from cloning keys to cars or hacking into your car's computer system. It can also encourage them to leave the vehicle alone.

Once installed your ghost immobiliser generates a unique pincode of up to twenty digits by using the buttons on your vehicle (steering wheels or centre consoles, or door panels). The code must be entered to start your vehicle. This code sequence is required every time you want to drive your vehicle, just like a PIN or password on a bank card. The code can be reset by entering a string of numbers into the Ghost app on your smartphone.

The Autowatch Ghost II CAN immobiliser also has two deactivation options for valet and service which allow you to temporarily start your car without a code for access as the key fob, while it is in the garage or with a valet parking provider. The immobiliser can be activated when your vehicle is in a parking spot.

The Ghost is unlike other security systems on the market. It doesn't have any LED indicators, and it works completely silently using the CAN data network that is in your vehicle. It's also not vulnerable to the same types of circuit cuts that are found in other security devices, as it doesn't use radio waves.

It can be placed in a way that is discreet and hidden from view, and is therefore impossible for thieves to locate and detect. It's also not able to be detected by advanced scanning tools or code grabbing technology that are commonly used to locate and disable security devices.

The Ghost is a premium modern CAN bus immobiliser that provides top-of-the-line protection against key cloning car hacking and relay theft. It is simple to install and is not detected by thieves. It cannot be disarmed with simple wire cutting. This makes it an essential for any driver who wishes to secure their vehicle.